Starter Pipe – Ø 150mm (6inch) / 1000mm black matt
£ 70,00
The 1000mm Starter Pipe has a built in condensate ring at the bottom of the pipe that allows direct connection on to a continental style spigot, leaving a clean look to the connection off the top of the stove. High temp silicone or cement must be used under the condense ring to make sure a gas tight seal is made with the stove spigot.
Description
Key Features
- Versatile Use: Suitable for gas, oil and solid fuel appliances up to 600°C.
- Connecting Pipe: Designed to connect an appliance to a flue liner, chimney stack or Twin Wall system.
- Single-Skin Construction: Made from zero-carbon steel with a matt black powder vitreous enamel coating.
- Friction-Fit Joints: No sealing normally required; fire cement or high-temperature silicone can be used if required.
- Cut-to-Length: Can be cut to suit installation, with exposed steel protected using high-temperature paint.
- Safe Installation: Keep at least 375mm from combustible materials and do not use through ceilings or combustible walls.
Installation
Install with the smaller diameter pointing downward and maintain the required 375mm clearance from combustibles. Appropriate PPE should be worn.
Maintenance
Provide access for inspection and cleaning. Solid fuel chimneys should be swept at least once a year.
Product Overview
VIT-Smooth is a single-skin connecting flue system made from zero-carbon steel with a matt black vitreous enamel finish, suitable for gas, oil and solid fuel appliances up to 600°C.
