Skip to content- Flashing, Ø 125mm (5inch)
- £ 155,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 25,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 80,00
- A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 80,00
- A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 98,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
- Ø 125mm (5inch), Supports
- £ 87,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
- Ø 125mm (5inch), Supports
- £ 73,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
- Ø 150mm (6inch), Supports
- £ 81,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment. This…
- Add to basket
- Ø 125mm (5inch), Supports
- £ 68,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 77,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 130mm (maximum) adjustment from the wall surface allowing a 50mm adjustment.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 31,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 28,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 130mm (maximum) adjustment from the wall surface allowing a 50mm adjustment.
- Add to basket