Skip to content- Ø 125mm (5inch), Supports
- £ 67,00
- Simplify your chimney installation and enhance its stability with the Retrofit Adjustable Base Support. Whether you're working on a new build, retrofitting an existing chimney, or need additional support for longer chimney runs, this versatile component ensures safety and peace of mind for your chimney project.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 72,00
- The Retrofit base support is adjustable from 0mm to 120mm from the wall, it can be used in conjunction with 90° or 135° tees when fitted directly above. This item can also be used as a load bearing intermediate support on longer flue runs and can be retro fitted to make installation simpler. One support to be used on most…
- Add to basket
- Ø 150mm (6inch), Supports
- £ 203,00
- Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support has a small levelling adjustment of 50mm to 80mm from the wall surface. Only recommended fixings should be used to fit this base support to the building surface.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 175,00
- Diameter: This adjustable base support is designed for chimney systems with a 125mm diameter. Ensure the longevity and reliability of your chimney system by using our Adjustable Base Support. Its innovative design allows for easy leveling and positioning, making it a valuable addition to any chimney installation. Whether you're working on a new build or need to retrofit an existing…
- Add to basket
- Ø 125mm (5inch), Terminals
- £ 80,00
- Enhance the integrity and functionality of your flue system with our Standard Rain Cap Terminal, now equipped with a 25mm square wire mesh. Say goodbye to worries about birds and vermin blocking your flue, and enjoy a safer, more efficient appliance operation. Plus, its compatibility with various fuel types makes it a versatile choice for a wide range of heating…
- Add to basket
- Ø 150mm (6inch), Terminals
- £ 113,00
- Standard rain cap terminal with added 25mm square wire mesh to stop birds or vermin entering and blocking the flue way. Suitable for all fuel except gas.
- Add to basket
- TRADE SPECIAL OFFER
- £ 3.800,00
- PACK CONTENTS 4 x Mi-Fire Derwent MF Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Register Plate.
- Add to basket
- TRADE SPECIAL OFFER
- £ 3.650,00
- PACK CONTENTS 4 x Mi-Fire Grisedale MF Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Register Plate.
- Add to basket
- TRADE SPECIAL OFFER
- £ 3.500,00
- PACK CONTENTS 4 x Mi-Fire Skiddaw MF Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Register Plate.
- Add to basket
- TRADE SPECIAL OFFER
- £ 4.000,00
- PACK CONTENTS 4 x Mi-Fire Loughrigg MF Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Register Plate.
- Add to basket
- TRADE SPECIAL OFFER
- £ 4.320,00
- PACK CONTENTS 4 x Large Tinderbox Multifuel Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Register Plate.
- Add to basket
- TRADE SPECIAL OFFER
- £ 4.320,00
- PACK CONTENTS 4 x Medium Tinderbox Multifuel Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Register Plate.
- Add to basket
- TRADE SPECIAL OFFER
- £ 4.000,00
- PACK CONTENTS 4 x Medium Tinderbox Multifuel Stove, 4 x 10m of 316L Flexible Flue liner, 4 x Mi-FLEX Pot Hanging Cowl, 4 x SCREW-FIX Adaptor, 4 x VIT-Smooth 500mm Pipe, 4 x Chimney Notice Plate, 4 x Firehawk Carbon Monoxide Alarm, 4 x Register Plate.
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.539,00 Original price was: £ 1.539,00.£ 1.259,00Current price is: £ 1.259,00. - EACH PACK INCLUDES: Medium Tinderbox Wood Stove, 10m of 316L Flexible Flue liner, Mi-FLEX Pot Hanging Cowl, SCREW-FIX Adaptor, VIT-Smooth 500mm Pipe, Register Plate,
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.599,00 Original price was: £ 1.599,00.£ 1.299,00Current price is: £ 1.299,00. - EACH PACK INCLUDES: Small Tinderbox Wood Stove, 10m of 316L Flexible Flue liner, Mi-FLEX Pot Hanging Cowl, SCREW-FIX Adaptor, VIT-Smooth 500mm Pipe, Chimney Notice Plate, Firehawk Carbon Monoxide Alarm and Register Plate.
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.499,00 Original price was: £ 1.499,00.£ 1.199,00Current price is: £ 1.199,00. - EACH PACK INCLUDES: Large Tinderbox Wood Stove, 10m of 316L Flexible Flue liner, Mi-FLEX Pot Hanging Cowl, SCREW-FIX Adaptor, VIT-Smooth 500mm Pipe, Chimney Notice Plate, Firehawk Carbon Monoxide Alarm and Register Plate.
- Add to basket
- The Lakes
- £ 699,00
- Dimensions (H x W x D): 637 x 459 x 373mm Weight: 78.5 kg Rated Power: 5 kW Energy Rating: A Efficiency: 78.8% Distance to Combustibles: Side: 400mm, Back: 400mm
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.559,00 Original price was: £ 1.559,00.£ 1.310,00Current price is: £ 1.310,00. - EACH PACK INCLUDES: Large Tinderbox Multifuel Stove, 10m of 316L Flexible Flue liner, Mi-FLEX Pot Hanging Cowl, SCREW-FIX Adaptor, VIT-Smooth 500mm Pipe, Register Plate.
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.499,00 Original price was: £ 1.499,00.£ 1.279,00Current price is: £ 1.279,00. - EACH PACK INCLUDES: Medium Tinderbox Multifuel Stove, 10m of 316L Flexible Flue liner, Mi-FLEX Pot Hanging Cowl, SCREW-FIX Adaptor, VIT-Smooth 500mm Pipe, Register Plate.
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.459,00 Original price was: £ 1.459,00.£ 1.199,00Current price is: £ 1.199,00. - EACH PACK INCLUDES: Small Tinderbox Multifuel Stove, 10m of 316L Flexible Flue liner, Mi-FLEX Pot Hanging Cowl, SCREW-FIX Adaptor, VIT-Smooth 500mm Pipe, Register Plate.
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.550,00 Original price was: £ 1.550,00.£ 1.199,00Current price is: £ 1.199,00. - PACK CONTENTS 1 x Loughrigg Wood Stove, 1 x 10m of 316L Flexible Flue liner, 1 x Mi-FLEX Pot Hanging Cowl, 1 x SCREW-FIX Adaptor, 1 x VIT-Smooth 500mm Pipe, 1 x Chimney Notice Plate, 1 x Firehawk Carbon Monoxide Alarm 1 x Register Plate.
- Add to basket
- Holborn
- £ 1.555,00
- Lifetime guarantee Better than Ecodesign standards when burning wood or solid fuel Non-smoker paint 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5in) flue outlet Direct air compatible Preheated air-wash system for clean glass Externally controlled riddling grate Height adjusting legs as standard Optional Solid fuel kit…
- Add to basket
- Holborn
- £ 1.399,00
- Lifetime guarantee Better than Ecodesign standards when burning wood or solid fuel Non-smoker paint 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5in) flue outlet Direct air compatible Preheated air-wash system for clean glass Externally controlled riddling grate Height adjusting legs as standard Optional Solid fuel kit…
- Add to basket
- Holborn
- £ 1.355,00
- Lifetime guarantee Better than Ecodesign standards when burning wood or solid fuel Non-smoker paint 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5in) flue outlet Direct air compatible Preheated air-wash system for clean glass Externally controlled riddling grate Height adjusting legs as standard Optional Solid fuel kit…
- Add to basket
- Lagom
- £ 2.599,00
- Product Details Ecodesign Ready 10-year guarantee Available in white ceramic only Integrated lower kindling/tool storage area Self-closing door Simple, discreet air controls Top or rear 6inch flue outlet Integrated heat shield for reduced distance to combustible materials Direct air compatible Output:4.0 kW (Wood) Energy Rating:A+ (Wood) Code: LAGOM-CERAMIC Width:528mm Height:996mm Depth:398mm
- Add to basket
- Ecoburn
- £ 1.530,00
- Product Details 10-year guarantee Ecodesign Ready / clear Skies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Lifetime guarantee Better than Ecodesign standards when burning wood or solid fuel Non-smoker paint 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate…
- Add to basket
- Ecoburn
- £ 1.449,00
- Product Details 10-year guarantee Ecodesign Ready / clear Skies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Lifetime guarantee Better than Ecodesign standards when burning wood or solid fuel Non-smoker paint 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate…
- Add to basket
- Ecoburn
- £ 1.340,00
- Product Details 10-year guarantee Ecodesign Ready / clear Skies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Lifetime guarantee Better than Ecodesign standards when burning wood or solid fuel Non-smoker paint 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate…
- Add to basket
- Hamlet, MULTI FUEL
- £ 999,00
- Product Details 10-year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated air wash system for clean glass Externally controlled riddling grate Output:7.1 kW (Solid) 7.1kW (Wood) Energy Rating:E…
- Add to basket
- Hamlet
- £ 1.030,00
- Product Details 10-year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated air wash system for clean glass Externally controlled riddling grate Output: 7.1 kW (Solid) 7 kW (Wood)…
- Add to basket
- Hamlet, MULTI FUEL
- £ 949,00
- Product Details 10-year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated air wash system for clean glass Externally controlled riddling grate Output:5 kW (Solid) 5 kW (Wood) Energy…
- Add to basket
- Hamlet, MULTI FUEL
- £ 999,00
- Product Details 10-year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated air wash system for clean glass Externally controlled riddling grate Output:5 kW (Solid) 5 kW (Wood) Energy…
- Add to basket
- Outdoor
- £ 799,00
- Suitable for use on wooden decking Made from 4mm thick weather-resistant zinc primer-coated steel Adjustable air control Vermiculite liner panels are included as standard for increased fuel efficiency Integrated log storage area Integrated top flue with cap Optional Pizza Stone with interior support for cooking inside fire chamber Optional extendable shelves for increased food preparation area Height adjustable feet for…
- Add to basket
- Hamlet, MULTI FUEL
- £ 850,00
- Product Details 10-year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated air-wash system for clean glass Externally controlled riddling grate Output:4.9 kW (Solid) 4.9 kW (Wood) Energy Rating:E…
- Add to basket
- Hamlet, MULTI FUEL
- £ 799,00
- Product Details 10-year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colors 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated air-wash system for clean glass Externally controlled riddling grate Output:4.8 kW (Solid) 4.8 kW (Wood) Energy Rating:…
- Add to basket
- Hamlet, MULTI FUEL
- £ 749,00
- Product Details 10 year guarantee Ecodesign Ready / clearSkies approved Burns wood or solid smokeless fuels Available in multiple colours 'Exempt appliance' - approved for use in Smoke Control Areas Stainless steel ash pan and throat plate Top or rear 127mm (5inch) flue outlet Preheated airwash system for clean glass Externally controlled riddling grate Output:4.4 kW (Solid) 4.6kW (Wood) Energy Rating:…
- Add to basket
- INSIDE installer pack
- £ 1.880,00
- PACK CONTENTS 1 x Mi-Fire Skiddaw Stove 1 x 500mm VIT-Smooth - Ø 125 1 x Adjustable VIT-Smooth Length - Ø 125 1 x TWPro Black Adaptor Ø 125 5 x TWPro Black 1000mm Pipe - Ø 125 1 x TWPro Black 500mm Pipe - Ø 125 1 x TWPro Black Wall Band - Ø 125 1 x TWPro Black…
- Add to basket
- INSIDE installer pack
- £ 1.999,00
- PACK CONTENTS 1 x Mi-Fire Grisedale Stove 1 x 500mm VIT-Smooth - Ø 125 1 x Adjustable VIT-Smooth Length - Ø 125 1 x TWPro Black Adaptor Ø 125 5 x TWPro Black 1000mm Pipe - Ø 125 1 x TWPro Black 500mm Pipe - Ø 125 1 x TWPro Black Wall Band - Ø 125 1 x TWPro Black…
- Add to basket
- INSIDE installer pack
- £ 1.900,00
- PACK CONTENTS 1 x Mi-Fire Derwent MF Stove 1 x 500mm VIT-Smooth - Ø 125 1 x Adjustable VIT-Smooth Length - Ø 125 1 x TWPro Black Adaptor Ø 125 5 x TWPro Black 1000mm Pipe - Ø 125 1 x TWPro Black 500mm Pipe - Ø 125 1 x TWPro Black Wall Band - Ø 125 1 x TWPro…
- Add to basket
- OUTSIDE installer pack
- £ 2.460,00
- PACK CONTENTS 1 x Mi-Fire Skiddaw Stove 1 x 500mm VIT-Smooth - Ø 125 1 x Adjustable VIT-Smooth Length - Ø 125 1 x 45° Bend VIT-Smooth - Ø 125 1 x TWPro Black Adaptor Ø 125 2 x TWPro Black 45° Bend - Ø 125 1 x TWPro Black 135° Long Tee - Ø 125 1 x TWPro Black…
- Add to basket
- OUTSIDE installer pack
- £ 2.580,00
- PACK CONTENTS 1 x Mi-Fire Grisedale Stove 1 x 500mm VIT-Smooth - Ø 125 1 x Adjustable VIT-Smooth Length - Ø 125 1 x 45° Bend VIT-Smooth - Ø 125 1 x TWPro Black Adaptor Ø 125 2 x TWPro Black 45° Bend - Ø 125 1 x TWPro Black 135° Long Tee - Ø 125 1 x TWPro Black…
- Add to basket
- OUTSIDE installer pack
- £ 2.480,00
- PACK CONTENTS 1 x Mi-Fire Derwent MF Stove 1 x 500mm VIT-Smooth - Ø 125 1 x Adjustable VIT-Smooth Length - Ø 125 1 x 45° Bend VIT-Smooth - Ø 125 1 x TWPro Black Adaptor Ø 125 2 x TWPro Black 45° Bend - Ø 125 1 x TWPro Black 135° Long Tee - Ø 125 1 x TWPro…
- Add to basket
- FlickrFLAME
- £ 799,00
- Product Details SKU 139-S-FLICKRFL Item Small FlickrFLAME - 4.9 kW - ECODesign Rated Power: 4.9 kW Energy Rating: A+ Weight: 65 Kg Efficiency: 0.827 CO (at 13% O2): 0.09 Mean Flue Temp: 231°C DIN Plus dust (at 13% O2): 18 Nmg/m3 Mean CnHm (at 13% O2): 65 Nmg/m3 Mean NOx (at 13% O2): 103 Nmg/m3 Distance to Combustibles: Side: 400mm,…
- Add to basket
- FlickrFLAME
- £ 830,00
- Product Details SKU 139-M-FLICKRFL Item Medium FlickrFLAME - 5 kW - ECODesign 5 kW - ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 64 Kg Efficiency: 0.851 CO (at 13% O2): 0.08 Mean Flue Temp: 218°C DIN Plus dust (at 13% O2): 13 Nmg/m3 Mean CnHm (at 13% O2): 70 Nmg/m3 Mean NOx (at 13% O2): 98 Nmg/m3 Distance…
- Add to basket
- FlickrFLAME
- £ 850,00
- Product Details SKU 139-L-FLICKRFL Item Large FlickrFLAME - 5 kW - ECODesign 5 kW - ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 76 Kg Efficiency: 0.804 CO (at 13% O2): 0.1 Mean Flue Temp: 249°C DIN Plus dust (at 13% O2): 14 Nmg/m3 Mean CnHm (at 13% O2): 79 Nmg/m3 Mean NOx (at 13% O2): 127 Nmg/m3 Distance…
- Add to basket
- FLEXIBLE installer pack, LOG BOX, STOVE + INSTALLER PACK
- £ 1.550,00
- Description SKU 131-X8T-PK3 Item ST-X8 Tall - 316L Installer Pack Heat output 8 kW Dimensions Height: 853mm Width: 515mm Depth: 416mm Approx weight 120 kg Flue Size 5" (125mm) Internal Firebox Width 390mm Internal Firebox Depth 290mm Max Log Size 14 inch (360mm) Rear to centre of top flue 120mm Floor to centre of rear flue 753mm Suitable for use…
- Add to basket
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
- £ 1.400,00
- Description SKU 131-X8-PK3 Item ST-X8 - 316L Installer Pack Heat output 8 kW Dimensions Height: 664mm Width: 515mm Depth: 416mm Approx weight 120 kg Flue Size 5" (125mm) Internal Firebox Width 390mm Internal Firebox Depth 290mm Max Log Size 14 inch (360mm) Rear to centre of top flue 120mm Floor to centre of rear flue 560mm Suitable for use on…
- Add to basket
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
- £ 1.350,00
- PACK CONTENTS 1 x ST-X5 Multi Fuel Stove 1 x 10m of Ø 125mm 316L Flexible Flue liner 1 x Reg.Plate (F) - 125-150mm - 900x495 1 x VIT-Smooth 500mm Pipe- Ø 125mm 1 x Adaptor to S/W (MA) Economy - Ø 125mm 1 x Mi-FLEX Pot Hanging Cowl (Terracotta) - Ø 125mm
- Add to basket
- >5kW, FLEXIBLE installer pack, LOG BOX, STOVE + INSTALLER PACK
- £ 1.260,00
- Description SKU 131-X4T-PK3 Item ST-X4 Tall - 316L Installer Pack Heat output 4.1kW Dimensions Height: 689mm Width: 395mm Depth: 330mm Approx weight 90kg Flue Size 5" (125mm) Internal Firebox Width 285mm Internal Firebox Depth 225mm Max Log Size 10 inch (255mm) Rear to centre of top flue 118mm Floor to centre of rear flue 591mm Suitable for use on 12mm…
- Add to basket
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
- £ 1.135,00
- Description SKU 131-X4-PK3 Item ST-X4 - 316L Installer Pack Heat output 4.1kW Dimensions Height: 489mm Width: 395mm Depth: 330mm Approx weight 70kg Flue Size 5" (125mm) Internal Firebox Width 285mm Internal Firebox Depth 225mm Max Log Size 10 inch (255mm) Rear to centre of top flue 118mm Floor to centre of rear flue 390mm Suitable for use on 12mm hearth…
- Add to basket
- FLEXIBLE installer pack, LOG BOX, STOVE + INSTALLER PACK
- £ 1.350,00
- Description SKU 131-X5T-PK3 Item ST-X5 Tall - 316L Installer Pack Heat output 5 kW Dimensions Height: 835mm Width: 460mm Depth: 370mm Approx weight 110 kg Flue Size 5" (125mm) Internal Firebox Width 340mm Internal Firebox Depth 255mm Max Log Size 12 inch (255mm) Rear to centre of top flue 120mm Floor to centre of rear flue 730mm Suitable for use…
- Add to basket
- LOG BOX, Tinderbox Stove
- £ 1.050,00
- Product Details SKU 137-LLG-TBOX Item Large Tinderbox on Log Box 5kW ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 76 Kg Efficiency: 80.4 CO (at 13% O2): 0.1 Mean Flue Temp: 249°C DIN Plus dust (at 13% O2): 14 Nmg/m3 Mean CnHm (at 13% O2): 79 Nmg/m3 Mean NOx (at 13% O2): 127 Nmg/m3 Distance to Combustibles: Side: 400mm,…
- Add to basket
- LOG BOX, Tinderbox Stove
- £ 1.015,00
- Product Details SKU 137-SLG-TBOX Item Small Tinderbox on Log Box 5kW ECODesign Rated Power: 4.9 kW Energy Rating: A+ Weight: 76 Kg Efficiency: 8.27 CO (at 13% O2): 0.09 Mean Flue Temp: 231°C DIN Plus dust (at 13% O2): 18 Nmg/m3 Mean CnHm (at 13% O2): 65 Nmg/m3 Mean NOx (at 13% O2): 103 Nmg/m3 Distance to Combustibles: Side: 400mm,…
- Add to basket
- LOG BOX, Tinderbox Stove
- £ 970,00
- Product Details SKU 137-MLG-TBOX Item MediumTinderbox on Log Box 5kW ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 76 Kg Efficiency: 0.851 CO (at 13% O2): 0.08 Mean Flue Temp: 218°C DIN Plus dust (at 13% O2): 13 Nmg/m3 Mean CnHm (at 13% O2): 70 Nmg/m3 Mean NOx (at 13% O2): 98 Nmg/m3 Distance to Combustibles: Side: 400mm, Back:…
- Add to basket
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
- £ 1.200,00
- PACK CONTENTS 1 x Mi-Fire Skiddaw Stove 1 x 10m of Ø 125mm 316L Flexible Flue liner 1 x Reg.Plate (F) - 125-150mm - 900x495 1 x VIT-Smooth 500mm Pipe- Ø 125mm 1 x Adaptor to S/W (MA) Economy - Ø 125mm 1 x Mi-FLEX Pot Hanging Cowl (Terracotta) - Ø 125mm
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.599,00 Original price was: £ 1.599,00.£ 1.299,00Current price is: £ 1.299,00. - PACK CONTENTS 1 x Mi-Fire Grisedale Stove 1 x 10m of Ø 125mm 316L Flexible Flue liner 1 x Reg.Plate (F) - 125-150mm - 900x495 1 x VIT-Smooth 500mm Pipe- Ø 125mm 1 x Adaptor to S/W (MA) Economy - Ø 125mm 1 x Mi-FLEX Pot Hanging Cowl (Terracotta) - Ø 125mm
- Add to basket
- Sale!
- FLEXIBLE installer pack, STOVE + INSTALLER PACK
-
£ 1.649,00 Original price was: £ 1.649,00.£ 1.220,00Current price is: £ 1.220,00. - PACK CONTENTS 1 x Mi-Fire Derwent MF Stove 1 x 10m of Ø 125mm 316L Flexible Flue liner 1 x Reg.Plate (F) - 125-150mm - 900x495 1 x VIT-Smooth 500mm Pipe- Ø 125mm 1 x Adaptor to S/W (MA) Economy - Ø 125mm 1 x Mi-FLEX Pot Hanging Cowl (Terracotta) - Ø 125mm
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 41,00
- The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 90° and 60°. Use silicone and screws to secure against the wall.
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 35,00
- Our Finishing Plate is the perfect solution for adding a polished, tidy finish to the area surrounding your flue as it passes through a non-combustible wall. Comprised of two parts, this plate is easy to install and enhances the aesthetics and safety of your solid fuel and gas/oil appliances, including woodstoves, gas coal effect fires, oil and gas boilers, and…
- Add to basket
- Accessories, Ø 125mm (5inch)
- £ 37,00
- Our Adjustable Wall Sleeve is a versatile solution designed to protect your chimney when the flue system passes through an exterior wall. This innovative product offers flexibility and ease of installation, making it an ideal choice for solid fuel and gas/oil appliances such as woodstoves, gas coal effect fires, oil and gas boilers, and other solid fuel devices.
- Add to basket
- Accessories, Ø 150mm (6inch)
- £ 44,00
- The Adjustable Wall Sleeve is used to protect the chimney in the wall passage when the flue system passes to the outside wall. The gap bewteen the flue and the Wall Sleeve can be filled with rockwool. This Wall Sleeve is precut at 45°, and is adjustable so it can be manually extended within wall.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 41,00
- The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 45° and 60°. Use silicone and screws to secure against the wall.
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 35,00
- Our Finishing Plate, comprised of two parts, is the perfect solution for adding a polished, tidy finish to the area surrounding your flue as it passes through a non-combustible wall. This plate is designed for use with solid fuel and gas/oil appliances, including woodstoves, gas coal effect fires, oil and gas boilers, and other solid fuel devices. It's an essential…
- Add to basket
- Elbows & Tees, Ø 125mm (5inch)
- £ 308,00
- Our Long 135° Tee is a vital component for ensuring easy access and efficient cleaning at the base of your chimney. It is the first piece installed on the external wall and serves as an access point for cleaning the flue, all while maintaining optimal airflow. This versatile tee is designed for use with a wide range of heating appliances,…
- Add to basket
- Elbows & Tees, Ø 125mm (5inch)
- £ 174,00
- Our 135° Tee is an essential component designed for easy cleaning access at the base of your chimney. This tee is the first piece to be installed on the external wall and provides a convenient and efficient way to maintain and clean your flue. Its design ensures that it does not restrict the flow of flue gases, making it a…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 40,00
- Our Base Cap with Drain is an essential component designed to cap off the bottom or unused end of a 90/135 Tee. It is typically fitted to the bottom of a base support to allow easy removal for sweeping and access, ensuring convenient maintenance of your flue system. This versatile part includes a 10mm threaded drain, which permits the connection…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 341,00
- Our 90° Tee is a versatile component used when connecting the flue to the rear outlet of an appliance, especially when dealing with wood-burning stoves. This Tee features a 450mm branch, enabling direct installation onto the back of a wood-burning stove and passing through a standard brick wall. It is suitable for use with a wide range of solid fuel…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 127,00
- Our 90° Tee is a vital component, typically used when connecting the flue to the rear outlet of an appliance. This Tee is specifically designed to facilitate this connection, ensuring optimal performance and safety for a variety of solid fuel and gas/oil appliances. It is suitable for use with woodstoves, gas coal effect fires, oil boilers, gas boilers, and various…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 341,00
- Our Long 135° Tee is an essential component designed for providing convenient cleaning access at the base of your chimney. It serves as the first piece to be installed on the external wall and enables easy cleaning of the flue, ensuring your flue system remains efficient and well-maintained. This versatile Tee is suitable for use with a wide range of…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 188,00
- Our 135° Tee is a crucial component when you require cleaning access at the base of your chimney. It serves as the first piece to be installed on the external wall, providing an easy and efficient way to clean the flue. The Tee's design ensures that it doesn't impede the flow of flue gases, contributing to the optimal performance of…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 76,00
- Our 2-Segment 45° Bend is a crucial component for managing offset details in your chimney system. This bend is designed to provide the flexibility needed for offsetting your flue, ensuring that it is compatible with a variety of solid fuel and gas/oil appliances. It is suitable for use with woodstoves, gas coal effect fires, oil boilers, gas boilers, and other…
- Add to basket
- Elbows & Tees, Ø 150mm (6inch)
- £ 126,00
- Our 3-Segment 90° Bend is a vital component designed to assist in managing offset details within your chimney system. This bend provides the flexibility needed to create precise angles and offsets, ensuring it is compatible with a range of solid fuel and gas/oil appliances. It is suitable for use with woodstoves, gas coal effect fires, oil boilers, gas boilers, and…
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 42,00
- Our Rigid Fixed 100mm Pipe is a reliable and essential component designed to facilitate the efficient venting of solid fuel and gas/oil appliances, including woodstoves, gas coal effect fires, oil boilers, gas boilers, and other solid fuel devices. With an effective installed length of 65mm, this pipe is ideal for specific installation requirements.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 49,00
- Our Rigid Fixed 250mm Pipe, with an effective installed length of 215mm, is a reliable and essential component designed to facilitate the efficient venting of solid fuel and gas/oil appliances. This pipe is versatile and suitable for use with various heating appliances, including woodstoves, gas coal effect fires, oil boilers, gas boilers, and other solid fuel devices.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 83,00
- Our Rigid Fixed 500mm Pipe, with an effective installed length of 465mm, is a durable and essential component designed to facilitate the efficient venting of solid fuel and gas/oil appliances. This pipe is suitable for use with a wide range of heating appliances, including woodstoves, gas coal effect fires, oil boilers, gas boilers, and other solid fuel devices.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 64,00
- The Heavy duty roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. The larger plates offer more support than the standard -067 roof support. See loading…
- Add to basket
- Adaptors, Ø 150mm (6inch)
- £ 40,00
- Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a flat design to give an instant transition from the appliance or connecting flue to TWPro in the shortest length.
- Add to basket
- Adaptors, Ø 150mm (6inch)
- £ 29,00
- Universal adaptor used as a increasing adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall. Increases by a 25mm.
- Add to basket
- Adaptors, Ø 150mm (6inch)
- £ 29,00
- Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 64,00
- The Heavy duty roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. The larger plates offer more support than the standard -067 roof support. See loading…
- Add to basket
- Fire stops, Ø 125mm (5inch)
- £ 40,00
- The Firestop Cover Plate is used to cover an existing Firestop Plate. It gives the installation a pleasing finish, while still allowing enough air into the chamber without compromising the use of the Firestop Plate. It is attached to the underside of the Firestop Plate using magnets and spacers. It is important to use these spacers to allow the correct…
- Add to basket
- Fire stops, Ø 150mm (6inch)
- £ 44,00
- The Firestop Cover Plate is used to cover an existing Firestop Plate. It gives the installation a pleasing finish, while still allowing enough air into the chamber without compromising the use of the Firestop Plate. It is attached to the underside of the Firestop Plate using magnets and spacers. It is important to use these spacers to allow the correct…
- Add to basket
- Fire stops, Ø 125mm (5inch)
- £ 121,00
- This kit comprises of 2 ventilated fire stops and a support clamp that can be used as a complete kit on a T600 All fuels firestop installation. Please note this installation allows 3 meters of vertical support.
- Add to basket
- Fire stops, Ø 150mm (6inch)
- £ 145,00
- This kit comprises of 2 ventilated fire stops and a support clamp that can be used as a complete kit on a T600 all fuels firestop installation. Please note this installation allows 3 metres of vertical support.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 30,00
- The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. See loading data in guides.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 34,00
- The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. See loading data in guides.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 33,00
- The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 90°. Use silicone and screws to secure against the wall. 75mm wide
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 30,00
- The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 90°. Use silicone and screws to secure against the wall. 75mm wide.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 33,00
- The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 45°. Use silicone and screws to secure against the wall. 75mm wide
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 33,00
- The Round Finishing Plate comes in one complete part and is used to tidy the area around the flue as it passes through a wall. This plate is attached to the wall where the flue is passing through at 45°. Use silicone and screws to secure against the wall.
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 30,00
- The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 45°. Use silicone and screws to secure against the wall. 75mm wide
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 30,00
- The Round Finishing Plate comes in one complete part and is used to tidy the area around the flue as it passes through a wall. This plate is attached to the wall where the flue is passing through at 45°. Use silicone and screws to secure against the wall.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 33,00
- The Round Finishing Plate comes in one complete part and is used to tidy the area around the flue as it passes through a wall. This plate is attached to the wall where the flue is passing through at 45°. Use silicone and screws to secure against the wall.
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 30,00
- The Round Finishing Plate comes in one complete part and is used to tidy the area around the flue as it passes through a wall. This plate is attached to the wall where the flue is passing through at 90°. Use silicone and screws to secure against the wall.
- Add to basket
- Ø 150mm (6inch), Terminals
- £ 297,00
- Rotating cowls are one method of helping with the effects of down draft in the chimney system. The terminal has a rotating cover that will spin around in the wind equalizing the outlet velocity.
- Add to basket
- Ø 125mm (5inch), Terminals
- £ 248,00
- Rotating cowls are one method of helping with the effects of down draft in the chimney system. The terminal has a rotating cover that will spin around in the wind equalizing the outlet velocity.
- Add to basket
- Ø 125mm (5inch), Terminals
- £ 30,00
- Used to cover the final section of TWpro to the elements when a third party terminal is being used. Please note we take no responsibility for the fixing of the third party terminal to the TWPro system Chimney.
- Add to basket
- Ø 150mm (6inch), Terminals
- £ 31,00
- Used to cover the final section of TWpro to the elements when a third party terminal is being used. Please note we take no responsibility for the fixing of the third party terminal to the TWPro system Chimney.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 222,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 60,00
- Suitable for tiled roofs with external pipe diameters of 125mm to 225mm, the aluminium base size is 705mm x 501mm, the upstand is made from Grey SILICONE and is suitable for high temperatures.
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 54,00
- Suitable for tiled roofs with external pipe diameters of 125mm to 225mm, the aluminium base size is 705mm x 501mm, the upstand is made from Grey SILICONE and is suitable for high temperatures.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 205,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 155,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 222,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 155,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 155,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 205,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 28,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 155,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
- Flashing, Ø 125mm (5inch)
- £ 25,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 80,00
- A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 80,00
- A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 98,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
- Ø 125mm (5inch), Supports
- £ 87,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
- Ø 125mm (5inch), Supports
- £ 73,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
- Ø 150mm (6inch), Supports
- £ 81,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment. This…
- Add to basket
- Ø 125mm (5inch), Supports
- £ 68,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 77,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 130mm (maximum) adjustment from the wall surface allowing a 50mm adjustment.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 31,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 28,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 130mm (maximum) adjustment from the wall surface allowing a 50mm adjustment.
- Add to basket
- Ø 150mm (6inch), Terminals
- £ 49,00
- Used to cap off the bottom or unused end of a 90/135 Tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access, this part includes a 10mm threaded drain to allow the connection of a drain pipe to carry away excess condense from the flue system.
- Add to basket
- Ø 125mm (5inch), Terminals
- £ 40,00
- Used to cap off the bottom or unused end of a 90/135 Tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access, this part includes a 10mm threaded drain to allow the connection of a drain pipe to carry away excess condense from the flue system.
- Add to basket
- Elbows & Tees, Ø 125mm (5inch)
- £ 307,00
- The 90° Tee is usually installed when you are connecting the flue to the rear outlet of an appliance. This Tee has a 450mm branch that allows the Tee to be installed directly onto the back of a wood burning stove passing through a standard brick wall.
- Add to basket
- Adaptors, Ø 125mm (5inch)
- £ 63,00
- Universal adaptor to connect the appliance outlet to the TWPro incresesing 25mm , can also connect single wall connecting flue or vitreous enamel to TWPro. This has a flat design to give an instant transition from the appliance or connecting flue to TWPro in the shortest length.
- Add to basket
- Adaptors, Ø 125mm (5inch)
- £ 30,00
- Universal adaptor used as a increasing adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall. Increases by a 25mm.
- Add to basket
- Adaptors, Ø 125mm (5inch)
- £ 29,00
- Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall.
- Add to basket
- Adaptors
- £ 39,00
- Increasing adaptor from VIT-Smooth to VIT-Smooth, increasing in 25mm increments.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 47,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Flashing, Ø 150mm (6inch)
- £ 41,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Supports
- £ 26,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 79,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 55,00
- The 250mm Starter Pipe has a built in condensate ring at the bottom of the pipe that allows direct connection on to a continental style spigot, leaving a clean look to the connection off the top of the stove. High temp silicone or cement must be used under the condense ring to make sure a gas tight seal is made…
- Add to basket
- Ø 150mm (6inch)
- £ 59,00
- The 500mm Starter Pipe has a built in condensate ring at the bottom of the pipe that allows direct connection on to a continental style spigot, leaving a clean look to the connection off the top of the stove. High temp silicone or cement must be used under the condense ring to make sure a gas tight seal is made…
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 70,00
- The 1000mm Starter Pipe has a built in condensate ring at the bottom of the pipe that allows direct connection on to a continental style spigot, leaving a clean look to the connection off the top of the stove. High temp silicone or cement must be used under the condense ring to make sure a gas tight seal is made…
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 47,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 52,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 73,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 96,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 50,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 24,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 24,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 31,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 49,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 150mm (6inch), Pipes
- £ 51,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- OVALE, Ovale
- £ 1.941,00
- Product Details SKU 144-OVALE-P Item Mi-Fire Ovale P - Tall on pedestal Rated Power: 5kW Energy Rating: A+ Weight: 85kg Efficiency: 82.9 CO (at 13% O2): 0.06 Mean Flue Temp: 264 C DIN Plus dust (at 13% O2): 7 Nmg/m3 Mean CnHm (at 13% O2): 50 Mean NOx (at 13% O2): 80 Glass Size: 360mm (H) x 320mm (W) …
- Add to basket
- Ovale, OVALE
- £ 1.570,00
- Product Details SKU 144-OVALE-T Item Mi-Fire Ovale T - Tall with Door Rated Power: 5kW Energy Rating: A+ Weight: 85kg Efficiency: 82.9 CO (at 13% O2): 0.06 Mean Flue Temp: 264 C DIN Plus dust (at 13% O2): 7 Nmg/m3 Mean CnHm (at 13% O2): 50 Mean NOx (at 13% O2): 80 Glass Size: 360mm (H) x 320mm (W) …
- Add to basket
- Ovale, OVALE
- £ 1.714,00
- Product Details SKU 144-OVALE-LD Item Mi-Fire Ovale LD - Door Rated Power: 5kW Energy Rating: A+ Weight: 85kg Efficiency: 82.9 CO (at 13% O2): 0.06 Mean Flue Temp: 264 C DIN Plus dust (at 13% O2): 7 Nmg/m3 Mean CnHm (at 13% O2): 50 Mean NOx (at 13% O2): 80 Glass Size: 360mm (H) x 320mm (W) Available: RETAIL…
- Add to basket
- Ovale, OVALE
- £ 1.680,00
- Product Details SKU 144-OVALE-L Item Mi-Fire Ovale L Rated Power: 5kW Energy Rating: A+ Weight: 85kg Efficiency: 82.9 CO (at 13% O2): 0.06 Mean Flue Temp: 264 C DIN Plus dust (at 13% O2): 7 Nmg/m3 Mean CnHm (at 13% O2): 50 Mean NOx (at 13% O2): 80 Glass Size: 360mm (H) x 320mm (W) Available: RETAIL - Stove…
- Add to basket
- smoked
- £ 169,00
- Item: Glass Hearth Insert - 12mm x 1000mm x 300mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 219,00
- Item: Glass Hearth Quarter Circle- 12mm x 1100mm x 1100mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 289,00
- Item: Glass Hearth Circular - 12mm x 1150mm Dia SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 169,00
- Item: Glass Hearth Rectangular Small- 12mm x 800mm x 720mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 199,00
- Item: Glass Hearth Circle with Slice- 12mm x 1100mm Dia x 950mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 169,00
- Item: Glass Hearth Rectangular - 12mm x 850mm x 1000mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 149,00
- Item: Glass Hearth Rectangular - 12mm x 850mm x 1000mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 189,00
- Item: Glass Hearth Curved - 12mm x 1000mm x 800mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 199,00
- Item: Glass Hearth Tear Drop - 12mm x 1100mm x 1100mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- smoked
- £ 189,00
- Item: Glass Hearth Semi-Circle - 12mm x 1100mm x 850mm SMOKED Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 139,00
- Item: Glass Hearth Insert - 12mm x 1000mm x 300mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 149,00
- Item: Glass Hearth Pyramid - 12mm x 1000mm x 1000mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 199,00
- Item: Glass Hearth Quarter Circle- 12mm x 1100mm x 1100mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 249,00
- Item: Glass Hearth Circular - 12mm x 1150mm Dia CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 149,00
- Item: Glass Hearth Rectangular Small- 12mm x 800mm x 720mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 179,00
- Item: Glass Hearth Circle with Slice- 12mm x 1100mm Dia x 950mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 159,00
- Item: Glass Hearth Curved - 12mm x 1000mm x 800mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 179,00
- Item: Glass Hearth Tear Drop - 12mm x 1100mm x 1100mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- clear
- £ 159,00
- Item: Glass Hearth Semi-Circle - 12mm x 1100mm x 850mm CLEAR Thickness: 12mm CE Marked: Yes Meets Buildings Regulations: Yes
- Add to basket
- Flashings, Ø 125mm (5inch)
- £ 47,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Flashings, Ø 125mm (5inch)
- £ 41,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Supports
- £ 23,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Elbows & Tees
- £ 84,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 61,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 67,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 57,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 68,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 90,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 50,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch)
- £ 30,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch)
- £ 30,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 35,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 44,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
- Ø 125mm (5inch), Pipes
- £ 47,00
- VIT-Smooth is a single skin connecting flue system manufactured in zero carbon steel with Powder vitreous enamel coating in a matt black finish.
- Add to basket
Out of Stock
- MULTI FUEL, Tinderbox Stove
- £ 827,00
- Product Details SKU SMF-TBOX Item Small Tinderbox Multifuel Stove 5kW ECODesign Available: RETAIL - Stove on the pallet:1 WHOLESALE - stoves on the pallet: 4
- Read more
- MULTI FUEL, Tinderbox Stove
- £ 931,00
- Product Details SKU MMF-TBOX Item Medium Tinderbox Multifuel Stove 5kW ECODesign Available: RETAIL - Stove on the pallet:1 WHOLESALE - stoves on the pallet: 4
- Add to basket
- MULTI FUEL, Tinderbox Stove
- £ 1.035,00
- Product Details SKU LMF-TBOX Item Large Tinderbox Multifuel Stove 5kW ECODesign Available: RETAIL - Stove on the pallet:1 WHOLESALE - stoves on the pallet: 4
- Add to basket
- Sale!
- Tinderbox Stove
-
£ 923,00 Original price was: £ 923,00.£ 850,00Current price is: £ 850,00. - Product Details SKU S-TINDERBOX Item Small Tinderbox Wood Stove 49kW ECODesign Rated Power: 4.9 kW Energy Rating: A+ Weight: 65 Kg Efficiency: 0.827 CO (at 13% O2): 0.09 Mean Flue Temp: 231°C DIN Plus dust (at 13% O2): 18 Nmg/m3 Mean CnHm (at 13% O2): 65 Nmg/m3 Mean NOx (at 13% O2): 103 Nmg/m3 Distance to Combustibles: Side: 400mm, Back:…
- Add to basket
- Sale!
- Tinderbox Stove
-
£ 860,00 Original price was: £ 860,00.£ 800,00Current price is: £ 800,00. - Product Specifications: Dimensions: H 530mm, W 410mm, D 352mm Weight: 64 Kg Distance to Combustibles: Side: 400mm, Back: 250mm
- Add to basket
- Sale!
- Tinderbox Stove
-
£ 988,00 Original price was: £ 988,00.£ 940,00Current price is: £ 940,00. - Product Details SKU L-TINDERBOX Item Large Tinderbox Wood Stove 5kW ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 76 Kg Efficiency: 0.804 CO (at 13% O2): 0.1 Mean Flue Temp: 249°C DIN Plus dust (at 13% O2): 14 Nmg/m3 Mean CnHm (at 13% O2): 79 Nmg/m3 Mean NOx (at 13% O2): 127 Nmg/m3 Distance to Combustibles: Side: 400mm, Back:…
- Add to basket
- Tinderbox Stove
- £ 1.056,00
- Product Details SKU T-TINDERBOX Item Tall Tinderbox Wood Stove 5kW ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 76 Kg Efficiency: 0.804 CO (at 13% O2): 0.001 Mean Flue Temp: 249°C DIN Plus dust (at 13% O2): 14 Nmg/m3 Mean C?H? (at 13% O2): 79 Nmg/m3 Mean NOx (at 13% O2): 127 Nmg/m3 Distance to Combustibles: Side: 400mm; Back:…
- Add to basket
- MULTI FUEL, The Lakes
- £ 730,00
- Product Details SKU DERWENT Item Derwent Multifuel Stove - 5Kw - ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 65 Kg Efficiency: 80.7 CO (at 13% O2): 0.10 Mean Flue Temp: 278°C DIN Plus dust (at 13% O2): 11 Nmg/m3 Mean CnHm (at 13% O2): 79 Nmg/m3 Mean NOx (at 13% O2): 109 Nmg/m3 Distance to Combustibles: Side: 600mm,…
- Add to basket
- The Lakes
- £ 850,00
- Product Details SKU LOUGHRIGG Item Loughrigg Wood Stove - 49 kW - ECODesign Rated Power: 4.9 kW Energy Rating: A+ Weight: 65 Kg Efficiency: 82.7% CO (at 13% O2): 0.09 Mean Flue Temp: 231°C DIN Plus dust (at 13% O2): 18 Nmg/m3 Mean CnHm (at 13% O2): 65 Nmg/m3 Mean NOx (at 13% O2): 103 Nmg/m3 Distance to Combustibles: Side:…
- Add to basket
- Sale!
- The Lakes
-
£ 760,00 Original price was: £ 760,00.£ 620,00Current price is: £ 620,00. - Product Details SKU SKIDDAW Item Skiddaw Wood Stove - 5kW - ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 64 Kg Efficiency: 85.1% CO (at 13% O2): 0.08 Mean Flue Temp: 218°C DIN Plus dust (at 13% O2): 13 Nmg/m3 Mean CnHm (at 13% O2): 70 Nmg/m3 Mean NOx (at 13% O2): 98 Nmg/m3 Distance to Combustibles: Side: 400mm,…
- Add to basket
- Sale!
- The Lakes
-
£ 890,00 Original price was: £ 890,00.£ 770,00Current price is: £ 770,00. - Product Details SKU GRISEDALE Item Grisedale Wood Stove - 5kW - ECODesign Rated Power: 5 kW Energy Rating: A+ Weight: 76 Kg Effiency: 80.4 CO (at 13% O2): 0.10 Mean Flue Temp: 249°C DIN Plus dust (at 13% O2): 14 Nmg/m3 Mean CnHm (at 13% O2): 79 Nmg/m3 Mean NOx (at 13% O2): 127 Nmg/m3 Distance to Combustibles: Side: 400mm,…
- Add to basket
- Sale!
- MULTI FUEL, Solway
-
£ 850,00 Original price was: £ 850,00.£ 789,00Current price is: £ 789,00. - Product Details SKU L-SOLWAY Item LARGE Solway Multifuel Stove LARGE Solway Multifuel Stove EcoDesign 2022: Yes Fuel: Multi-Fuel Output: 8.0 Kw Efficiency: 0.796 CO emission: 0.10 Dimensions: 470W x 300D x 530H Energy Rating: A Weight: 89 Kg Defra: Test Done Distance to Combustibles: Side: 400mm, Back: 250mm Available: RETAIL – Stove on the pallet:1 WHOLESALE – stoves on…
- Add to basket
- Sale!
- MULTI FUEL, Solway
-
£ 749,00 Original price was: £ 749,00.£ 699,00Current price is: £ 699,00. - Product Details SKU M-SOLWAY Item MEDIUM Solway Multifuel Stove EcoDesign 2022: Yes Fuel: Multi-Fuel Output: 5.0 Kw Efficiency: 0.756 CO emission: 0.12 Dimensions: 350W x 280D x 487H Energy Rating: A Weight: 67 Kg Defra: Test Done Distance to Combustibles: Side: 400mm, Back: 250mm Available: RETAIL – Stove on the pallet:1 WHOLESALE – stoves on the pallet: 4
- Add to basket
- Sale!
- MULTI FUEL, Solway
-
£ 650,00 Original price was: £ 650,00.£ 550,00Current price is: £ 550,00. - Product Details SKU S-SOLWAY Item SMALL Solway Multifuel Stove EcoDesign 2022: Yes Fuel: Multi-Fuel Output: 4.1 Kw Efficiency: 0.754 CO emission: 0.1 Dimensions: 380W x 292D x 487H Energy Rating: A Weight: 59 Kg Defra: Test Done Distance to Combustibles: Side: 400mm, Back: 250mm Available: RETAIL – Stove on the pallet:1 WHOLESALE – stoves on the pallet: 4
- Add to basket
Out of Stock
- Blist
- £ 700,00
- Product Details SKU B2E With Water Coat Item B2E With Water Coat Wood Burner 15kW Blist EcoDesign 2022: Yes Fuel: Multi-Fuel (wood, + low-calorific coal 10% max) Output: 15 kW Efficiency: 62% CO emission: 0.10 Dimensions: 465W x 400D x 860H Energy Rating: A Weight: 94 Kg Defra: – Distance to Combustibles: Side: 650mm, Back: 750mm Available: RETAIL –…
- Read more
- Blist
- £ 249,00
- Product Details SKU Ekonomik LM Item Ekonomik LM Wood Burner 6.1kW Blist Rated Power: 6.1 kW Energy Rating: A Weight: 40Kg Efficiency: 74.7% CO (at 13% O2): 0.28.16 Mean Flue Temp: 278°C DIN Plus dust (at 13% O2): 15 Nmg/m3 Mean CnHm (at 13% O2): 45.37 Nmg/m3 Mean NOx (at 13% O2): 103.81 Nmg/m3 Distance to Combustibles: Side: 400mm, Back:…
- Add to basket
- Blist
- £ 350,00
- Product Details SKU Ekonomik LUX N Item Ekonomik LUX N Wood Burner 6.5kW Blist EcoDesign 2022: Yes Fuel: Multi-Fuel (wood, + low-calorific coal 10% max) Output: 6.5 kW Efficiency: 62% CO emission: 0.10 Dimensions: 400W x 460D x 900H Energy Rating: A Weight: 50 Kg Defra: - Distance to Combustibles: Side: 750mm, Back: 550mm Available: RETAIL – Stove on…
- Add to basket
- Blist
- £ 290,00
- Product Details SKU Ekonomik LUX LMN Item Ekonomik LUX LMN Wood Burner 6,1kW Blist Rated Power: 6.1 kW Energy Rating: A Weight: 40Kg Efficiency: 74.7% CO (at 13% O2): 0.28.16 Mean Flue Temp: 278°C DIN Plus dust (at 13% O2): 15 Nmg/m3 Mean CnHm (at 13% O2): 45.37 Nmg/m3 Mean NOx (at 13% O2): 103.81 Nmg/m3 Distance to Combustibles: Side:…
- Add to basket
- Blist
- £ 280,00
- Available: RETAIL – Stove on the pallet:1 WHOLESALE – stoves on the pallet: 6
- Add to basket