Lead Free Flashing 0° to 20° SS Cone Black Base – Ø 200 OD (150mm ID)
- £ 205,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
Storm Collar – Ø 150 / Twin Wall Black Matt
- £ 28,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
Lead Free Flashing 0° to 20° SS Cone Black Base – Ø 175 OD (125mm ID)
- £ 155,00
- Fully lead free flashing with a Fast Flash adhesive base that is suitable for tiled or slate roofs. Fast Flash Flexible Roof Flashing is a polymer based flashing material with an aluminium mesh reinforcement. The lower surface, which has a butyl self-adhesive layer and is finished with a film to protect the flashing during storage and installation. Suitable for flues…
- Add to basket
Storm Collar – Ø 150 (6inch) / Twin Wall Silver
- £ 30,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
Storm Collar – Ø 125 (5inch) / Twin Wall Silver
- £ 25,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
Storm Collar – Ø 125 (5inch) / Twin Wall Black Matt
- £ 25,00
- Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.
- Add to basket
Roof Brace Kit – Ø 150 / Twin Wall Black Matt
- £ 80,00
- A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.
- Add to basket
Roof Brace Kit – Ø 125 (5inch) / Twin Wall Black Matt
- £ 80,00
- A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.
- Add to basket
Wall Support 210mm-420mm – Ø 150 / Twin Wall Black Matt
- £ 98,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
Wall Support 210mm-420mm – Ø 150 (6inch) / Twin Wall Silver
- £ 93,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters.
- Add to basket
Wall Support 210mm-420mm – Ø 125 (5inch) / Twin Wall Silver
- £ 87,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters.
- Add to basket
Wall Support 210mm-420mm – Ø 125 (5inch) / Twin Wall Black Matt
- £ 87,00
- Wall support are to be used for lateral support only and should be use a minimum of every 3 meters. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This…
- Add to basket
